Taking care of your new graphics properly ensures they look sharp and last as long as possible.
Follow these simple steps to keep your graphics looking fresh!
✅ Basic Care Tips:
- Cleaning:
- Use caution when wiping mud, as this will scratch, dull, or prematurely wear the surface of your graphics.
- For best results, rinse thoroughly first and gently wash away any remaining residue with mild soap and water.
- Hand-wash with mild soap and water using a soft cloth or sponge.
- Avoid abrasive cleaners and harsh chemicals—they can damage or fade graphics.
- Rinse thoroughly and dry with a soft towel or microfiber cloth.
- ⚠ Pressure Washer (Optional, USE CAUTION)⚠ :
- Spray perpendicular (at a right angle) to your graphic.
- Avoid spraying from an area without graphics onto the edge of the graphic. This prevents water from being forced under the edges, which can cause lifting or peeling.
- Spraying directly on the graphic and allowing water to flow across and over the edge is acceptable, as it allows water to shed naturally without lifting the graphic.
- When in Doubt, DO NOT USE a Pressure Washer!
⚠️ If Graphics Start to Peel or Lift:
- Immediate Action:
- Use moderate heat to reactivate adhesive and press with moderate force to reapply.
- Attempt to carefully press the graphic back down immediately.
- If the graphic no longer adheres, cut away the lifted portion at the point where the adhesive is still intact.
- Removing dirty, lifted edges prevents further peeling and protects the rest of your graphic.
🚫 Avoid the Following:
- Gasoline, brake cleaner, or solvents—these will degrade adhesive and graphics.
- Direct spraying under graphic edges when cleaning.
- Scrubbing aggressively or using abrasive materials during cleaning.
🌤️ Additional Tips for Longer Life:
- Garage or Cover: Store your motorcycle in a covered area when possible.
- Use Protective spray to keep graphics looking new. (Maxima SC1 or similar)
Driven by Passion, Fueled to Ride! – Red Earth MotoSports